December 21, 2013

More knitting

Yes, I'm still knitting. Cheating on my sewing… Should I feel bad about that?

There are some peculiarities about knitting machines that I didn't discuss yet: 

First and most importantly, the normal knitting action, which I showed you in the previous post, results in flat knit work. The kind for which you would need to knit one row and purl the next when knitting by hand. Which is really convenient because that's the stitch you need most often. What's less convenient is that alteration between knitting and purling isn't really possible on a single bed machine (yes, there should be a trick which somehow involves turn stitches, but I don't quite understand that yet).
So, you can't make a regular rib or any of the many effect stitches using knit/purl variation. 
My manual shows a kind of mock-rib which I want to try, but haven't tried yet. What is odd though, is the fact that my 1957 Libelle magazines include the occasional pattern designed especially for knitting machines and those often have ribbed bands. Could those simple machines back then do something mine can't? Was there a trick everyone knew so they didn't need to explain it? Or were you supposed to knit those bits by hand? I just don't know.

Another issue is gauge. You can't just knit any thickness of yarn with any knitting machine. And the terms used for the size of the yarn is different too. My manual just speaks of one, two and three strands in the yarn… Apparently it means I can knit with yarn for normal needle sizes (European ones) 1 to 5. Or 2 to 7, depending on your source. I tried super thin yarn and it works, but the resulting fabric is so thin it's transparent. I haven't dared to try my thickest yarn yet (which should be for about a 7 needle) because I'm afraid it might damage the needles.
Anyway, there are knitting machines especially for bulkier yarns. And I'm sure there may also be some with their needles closer together so you can knit that superfine yarn into something non-transparant. Which really would be like making your own jersey fabric.
I'm happy with the gauge on my machine. As I've mentioned before, garments from bulky yarn may look nice but for me, they're just to warm for regular wear.

And about yarn, you really have to use yarn on cones for a knitting machine. You can get a wool winder and put yarn from balls on cones but you have to use cones when knitting. Because you knit a row at a time, the yarn has to be pulled up quite quickly. With a cone, which is just a giant spool, that's no problem. A ball of wool would get all tangled up.

And then we come to tho issue of patterns. 
Patterns especially for knitting machines are few and far between. I googled for them, both in Dutch and in English, and in both cases I was taken to Ebay listings for knitting machines and to normal knitting patterns on the first page. 

Of course, you can use some normal knitting patterns. I made my cardigan using one of those. But then, you have to deal with the knit/purl issue. And the fact that it's kind of impossible to measure your work while it's one the machine. And occasionally, you'll have to re-think to order of construction (like whether to knit from the top down or from the bottom up).
Oh, and a lot of modern knitting patterns are for (fairly) bulky yarns, so they may be no good on a regular knitting machine. Luckily, I like vintage patterns. 

Considering the pattern-situation, I was really surprised to find that, in 1957, Libelle printed a pattern for knitting machines in each issue (and this was a weekly magazine…). Knitting machines must have been really popular back then.
I have most of the issues from that year and there are a few project I like.

Right now, I'm working on this one, but with a difference.

You see, I like the sort of semi-fitted shape with the round yoke. They cleverly constructed the yoke from 10 separate pieces, negating both the need for more needles than there are on most machines and the tedious task of endlessly having to decrease stitches in the middle of your work.
But I don't like how blocky the yoke looks in that contrast colour and with that check pattern… 
In fact, I thought this might be a good opportunity to try out some of my machine's special effect stitches.

It will do several of those. That's what the buttons and handle are for.

Use them with one strand of yarn and the "N" setting and you get these kind of lacey things…

And switch to "MC" and introduce a second strand of yarn and you can do fair isle!

After these successful swatches, I decided to make a fair isle yoke. And with those small pieces, I'd limit the risk of messing it all up at the last moment. You know, by dropping a stitch in the second-to-last row, or something like that (you can pick up dropped stitches, but if they unravel far down, it gets difficult and in fair isle it's really hard because the extra hreads at the back make things really confusing).

I knew how many stitches and how many rows went into those yoke pieces, so I cut those on paper. I also knew that my machine has eight buttons which means it can only control the needles in sets of eight. 

When I was happy with the design, I drew out a chart, to tell my self when to press which buttons.

The good news is, it works. The bad news is it takes a lot of attention and effort. Forget to change one setting and you have to unravel a row, lose tension on one thread and stitches fall off. Drop a stitch and you can't put it back on because you can't see whether loose threads at the back are just that, or belong to the stitch.
In flat knitting, I could have an entire back or sleeve done in two hours. These things take that long each. If they work out at all. And they never do in the evening. Even if I think I'm not tired, apparently I'm too tired for fair isle knitting my own design.
Four down, six more to go...

December 19, 2013

The knitting machine - 2

In this post, I'll try to show you how the knitting machine works.
I'd like to say, though, that if you consider buying a knitting machine, you should make sure you either get one which comes with its manual or you can get instruction on how to use it. If possible both.
I started out with just the manual and I have to say that most things I tried based on that went wrong about twenty times before they started to go right. Sometimes that was because I didn't properly understand the lingo yet, sometimes because there is only so much anyone can show in text and pictures, sometimes because the instruction were a bit sparse and often because I had yet to develop a feel for this thing.
It was a bit of a struggle and I'm sure I wouldn't have been able to figure it out without the manual.

When, on to knitting. Let's assume the machine is safely installed on a table and the sled with the thread guide are in place, like I showed in the last post. Position the sled at the right side of the needle bed.

To start knitting, you have to move those needles you want to use forward like this. 

Then, you can hang the comb between the needles. It attaches to the underside of the machine with two twisting bits of metal at either side. There are other ways of setting up stitches, but this is the easiest one and the most appropriate one if you just want to try it out.

Release the thread from it's resting position on the shaft of the thread tension unit and pull it into the hole in the thread guide on the sled. Pull on it until you hear the click which indicates you've inserted it in the hole at the bottom as well.
Hold the loose end at the bottom. If you don't the tension will pull it out.
Now, you can, gently, move the sled to the left. 

It should form a kind of zigzag between the needles you pulled forward and the teeth of the comb. Release the comb from the machine and let it hang just by that zigzag of thread. Hang the weights on the comb.

Move the sled back from left to right. This time, loops form around the zigzag and at this stage, you may recognize knitting stitches.
And that's all there is to it. Moving the sled back and forth over the needles creates normal flat knit. To increase the amount of stitches you just pull out more needles and to decrease, you hang two stitches on one needle (it takes a bit more trouble to decrease more than one at a time though. A bit more trouble, not a lot).

The experience of knitting in this way is, I guess, probably more like weaving that like hand-knitting. 

The machine makes each stitch like this (I'm trying to show it here by doing one by hand):

It pushes the needle forward so the stitch(=loop) which is on it is pushed back over the moveable lip of the needle. 

Then, the thread from the thread guide is pulled over the extended front of the needle. 

Getting caught there when the needle is pushed back again and the loop pushed the lip forward. 

When the loop is pulled over lip, it slides from the needle and has become the next stitch and a new loop hangs in the hook of the needle.

When you move the sled, its parts make one needle after the other go through these motions. It works great. If it all works.
That's something to watch out for: in order to go through the motion of knitting properly, each needle must be able to open all the way and close all the way. And to do so easily and smoothly. Needles which don't either cause dropped stitches or the piling on of loops. Those have to be replaced.
You also have to make sure that there's always a bit of tension on the thread in the sled. That is why the tension unit is there, but something may happen (like the cone suddenly unwinding quicker) which makes the thread go slack and if you try to knit with a slack thread, it won't get caught in (at least) the first few needles. Don't ask me how I know…

I hope this has clarified the process a little. I will continue in a next post about gauge, fancy stitches, patterns and other less hardware-minded things.

December 17, 2013

The knitting machine - 1

This post I promised you, about the knitting machine and how to work with it, got me a bit worried. I'm only a novice at this after all.
And yet, with so many people owning but not using knitting machines and yet so many others considering them, I thought I'd give it a go anyway.

In this post, I'll show you my knitting machine and try to explain a bit about the various types of machines you may come across. More information about working with it will follow later.

As I've told before, I bought my machine quite cheaply through a local auction site (a Dutch Ebay, basically). When I did so, I really didn't know anything about knitting machines. I just didn't want to spend much and this was one of the more elaborate machines which were for sale at a really low price.
Now I know that knitting machines were really popular from the 1950's onwards. A lot of the really vintage-looking Knittaxes and Passaps which I found must have been from that era. Many of the really old machines, including mine, were sold by people who didn't know how to work with them themselves. Which doesn't really help if you want to find out if the thing still works. All I could do when I went to pick the machine up, was to check if all the bits shown in the manual were accounted for (I searched for machines with manuals in the first place and I'm glad I did).
Then, there were the more sophisticated and more expensive machines: some double bed machines, some with punch cards and some which could be controlled by computer (watch out with those. A lot of the second-hand ones have their software on floppy disks…). 

 My knitting machine is a single bed one (which means you can't knit cables and real rib knit). It has room for 200 needles although I don't have quite that many (the lady at the store calculated that 180 should be enough to knit for my size and recommended I buy a few more than that). All the needles are held in place by the sponge bar (which you can't see here, it's on the inside. You have to take it out to change the needles though).  
You have to fix to machine to the table using two special screws. Some fancy machines come with their own tables, but most simple ones are like this.

The needles can be placed in various different settings, as indicated by the letters at the edges of the needle bed. You need those for different stitches.

To knit, you have to place the sled on the needle bed. This one has all kinds of buttons, but the only important one for normal knitting is the dial in the center, below the handle. That's to set the tension.

And attach the thread guide to it (Oh, I should mention that my manual is in Dutch and French. I'm just translating the names of the various parts so I may be getting all of them wrong. I'm only sure about the term 'sponge bar' because someone mentioned that in the comments the first time I blogged about the knitting machine).
The whole thing should move smoothly over the needles.

Then you can put the other bits on. 

This strange, spindly contraption is the thread tension unit. It's typically folded up in the box so you have to unfold it and insert it into a hole in the machine. Then you take the yarn from the cone (only one for normal knitting), guide it through it and put it in the clamp on the shaft (that's the yarn's waiting position. you put it there until you're ready to put it into the thread guide of the sled).

You can also click on the row counter. The lump of plastic sticking out at the right side of this simple gizmo is hit by the little metal bar on the sled on each pass and so it mechanically counts the rows.

My machine also has this collection of buttons. These are all for various fancy stitches. If you just want to do plain knitting, you don't use them.

There are a some tools which came with the machine and are really useful. 

The little ruler is used to push needles forward in knitting position. It just makes that easier. The middle thing is one you absolutely need. It's a helping needle which you use to transfer a stitch to another needle, like you have to do to bind off stitches.
The thing on the bottom is the handle to activate the settings for the fancy stitches (so a simpler machine won't have one of these).

You will also need these: these combs provide the easiest way to set up stitches and the weights are put on later to let the work hang properly.

As I mentioned before, there are many different kinds of knitting machines, however, I suppose a lot of features are pretty universal. 
I hope this post is of use to you and I'll be back soon to show more about working with the knitting machine.

December 13, 2013

The knitted thing

It's finished! The combination of me and the knitting machine really did it this time!

As I told you in the previous post, I set out to knit this cardi from the Margriet Knitting Show magazine (a yearly knitting special from the makers of Dutch women's magazine Margriet) from 1956. 


I should mention that technically, this is not a cardigan. In the pattern description, Margriet calls it a "dressy knitted blouse" and in the commentary next to the photograph they refer to it as an "elegant evening sweater". They also mention that it's best made in black. 

My version is altogether more casual. Although I have half a cone of black yarn in the same gauge, I decided to use this beautiful deep burnt orange.
I also didn't put the bias cut woven hem and neckline on. Those are supposed to go over the knitted edges but I didn't have any matching fabric. And I decided against the hem band at the very start because I thought fabric might not be as stretchy as the knit.

This is a rather shapely cardigan/blouse/sweater which made me worry about the fit. My bust-waist-hip ratio is fairly close to that of the Dutch 1950's sizing tables, but from my experience with a Marion sewing pattern, I learned that I may be a bit taller. 
And then there was the pattern description which didn't include a test for vertical size and described a lot of the knitting in centimeters rather than in rows (and you can't really measure the length of your work on a knitting machine because it is stretched out by the needles, which makes is look shorter). So, when I started knitting, I counted on my test square how many rows went into a centimeter and went from there.
And obviously, I couldn't really test the whole thing until I had knitted everything, blocked the pieces and sewed them together.


And I was not disappointed. In fact, the fit is rather close to what you can see in the original picture. The sleeves could have looked better if the sleeve heads were just a little higher and more shaped, but that's the pattern's fault. I made one real mistake while knitting, which was making the buttonholes half the described size. Which just meant I had to find small buttons. 


To keep the front opening straight in the fitted bodice, you have to attach a length of 4 cm wide grosgrain ribbon along the front edge. And then cut the buttonholes in it and finish them by hand. It doesn't look very neat on the inside but it works. 

This is not a very typical 1950's garment but it doesn't look 'standard' either. And I think it suits me.

Oh, and I noticed while knitting and looking at other 1950's knitting patterns, that the front and back of this garment, and indeed of almost all the other ones as well, are shaped in exactly the same way (apart from the neckline, that is). That may be normal to experienced knitters, but to me, a knitting newbie and experienced seamstress, it was a bit odd. 



And it means this thing can also be worn back to front. Which I kind of like as well.
I'm very happy with this first real knitting project and I'm already eyeing up potential next projects. 
And I will do a post about the technicalities of machine knitting as I know them next week. For the benefit of those of you who are (like I've been for a long time) interested in, but ignorant about knitting machines.

P.S. My apologies for the big pictures which don't fit in the template. Blogger has weird issues with uploading pictures right now, so they only look right in the original size.

December 10, 2013

Knitting

I don't knit. Not really. I have knitted a cardigan and a short sleeved sweater a couple of years ago. Both from modern patterns, using the exact yarn they were designed for. Both took me a very long time to finish. And they made me decide knitting just wasn't for me. Several intricate movements just to shape one stitch… I don't have the patience for that. I know the work goes faster if you use chunky yarn but those are expensive and their thickness means you end up with a seriously warm finished product. Too warm for my normal use.

Then, over a year ago, I bought a second hand knitting machine. It's seriously vintage. This Brother 710 is (at least) more than 30 years old. 
With quite a bit of fussing around, and the aid of the manual, I managed to get it to work. Sort of. I made a thing. Then, I bought some second hand cones of yarn for it. I tried knitting with some of those, and it didn't work. The thread kept breaking.
After that, I gave up for a while. The only place I had for the knitting machine was on my sewing table. So, trying to knit meant I couldn't sew. So, it was no contest really.

Now, that has changed. I bought a laptop a few months ago which means I can (partially) clear my desk. Which means I could put the knitting machine there.

So, last week, I took the old thing to a store (one of only two in the Netherlands) where they sell and repair knitting machines. Considering how busy they were while I was there, the good people of ABS don't need my recommendations, but they definitely deserve them. They didn't have a problem with servicing such an old machine, were really knowledgable and very helpful. The machine got a new sponge bar and some new needles and I got some valuable snippets of instruction (it's a 1,5 hour drive from my home to that store, so taking one of their courses is not really an option. If I lived closer, I'd do that). 
I also got some tips of how to deal with that breaking yarn. Apperently, old yarn gets too dry which makes it break easily. You can make it useable again by spraying some water over it in a fine mist (just with the yarn on the cone. And then you let it dry of course).

Now, I'm really knitting. 

I am trying to make this lovely cardigan from 1955. It's a lovely design and according to the test square, my yarn has the right gauge for it. However, the pattern doesn't make things easy with the way it alternates between talking about centimeters and rows. 

I had some weird accident (user error, no doubt) when trying to knit the back neckline which means I'll have to re-do the entire back. But the fronts (here pinned together to check their sizes) are finished. I think I'm getting the hang it and I'm looking forward to the finished item.

December 6, 2013

First winter

Little J's winter suit is finished!
I explained a lot of its details in the previous post: modified Knippie patterns, wool coating and interlining, cotton lining and rib knit.
I have to say I really like the combination of this fairly dull dark blue fabric with the bright red. I have I bit of both left, so I may even use them together again…

I bagged the lining of both garments, catching that rib knit between the layers. At those really small hand leg and arm openings, that was really fiddly.
And of course, I had to make the separating zipper quite a bit shorter. 
The zipper, by the way was also sewn in from the inside so there is no visible stitching there, not even on the flap behind it.
All the jacket still needs is a red lace for the hood. Unfortunately, I went to four different places (three market stalls and a store) which sell notions and none of them were selling laces anymore. I would have expected at least one of them to sell the stuff by the meter, I know they used to. 
And I'm thinking only now that I should buy actual shoe laces instead. On this small size, their length should not be a problem and those will have nicely finished tips… I should have thought of that earlier.

Now, all I have to do is hope that it will fit J and he and his parents will like it.

December 4, 2013

Family sewing

After all that time spent agonizing over the details of the 1930's inspired dress, it seemed to be time for some un-selfish sewing. 
My sister's son in six months old now and looking forward to his first winter. He has a coat, but his mother requested a kind of coat suit (two pieces) which he can wear on bicycle rides (riding in a child's seat on the handlebars of one of his parents' bikes, obviously. No idea how common that is anywhere else, but here in the Netherlands, parent cycle with small children like that all the time).

And she preferred the outfit to be made from all natural fabrics. Because of that, I'm using thin blue wool coating for the outer shell, un underlining of thick boiled wool knit and red cotton for the lining. And red cotton rib knit. 

A couple of weeks ago, I sent her some sketches to find out what kind of outfit she was looking for. She liked the hood, preferred a zipper closure, in the middle and thought my idea of using rib knit to keep the wind out would be good. 

At first, I planned on drafting the pattern myself but then I realized that all the instructions I have about drafting for children are for children who are old enough to stand up and not wear diapers anymore. And my nephew is obviously younger than that. (By the way, Dutch readers who want top sew for babies would do well to look up Pieke Stuvel's Baby & co. It's an easy-to-follow how-to book with patterns for babies. I gave it to my sister (who sews occasionally) as a birthday present just before little J was born and she has made good use of it)
So, I went to the library and borrowed the 2011 collection of Knippie magazine (the children's version of Dutch sewing magazine Knipmode). 

Unfortunately, there where no baby winter coats in it but I found some patterns I could use:


I traced these two for the basic shapes. Obviously I didn't bother with the pockets, decorative stitching etc. I don't see why anyone would want to fiddle with tiny patch pockets for a wearer who can't even use such pockets yet…

I made quite a lot of changes to the shirt. I went up a size in width for the ease needed in coat, replaced the button band with a zipper and made the bottom edge straight so I could at a rib knit band.

I'm working on it now. I really hope it will fit. Baby clothes really through off my sense of proportion. I just have no idea.
I'll show it to you when it's done but I probably won't be able to give the outfit to my nephew until the end of the month.

December 1, 2013

Finally… that 30's dress

It's really finished! In the end, I didn't line the dress, I'll make a full slip later.

As you may know by now, from my previous posts about this project, I didn't use an actual 1930's pattern for this dress. Instead, I took inspiration from the wonderful images in magazines from the era. 
One of the advantages of owning several magazines, spread over most of the years of the decade, is that you get to see the progress of fashion over time. That way, I learned that there were no shoulder pads in dresses before 1932 and even in that year, fullness at the shoulder was more often achieved by gathering than by stuffing the sleeve head. Also, in 1930, waistlines were still just a bit below the natural waist, they gradually rose during that year, to reach the true waist by 1931. At that time, the commentary in the magazines thought the dresses were very fitted but in fact, all bodices still had some blousing above the waist. The completely streamlined effect didn't really show up until about 1935… At least, in the Dutch issues of Gracieuse magazine. And in the French Petit Echo de la Mode.

Anyway, like those early 30's dresses, mine doesn't have shoulder pads. It has raglan sleeves and a satin cowl neck bodice with pleats. It fits at the natural waist at the back and rises to a point at the front (like so many original 1930's dresses). The basic shape of the skirt is straight and ever so slightly flared but from the side front (at both sides) a more flared piece is inserted which runs all the way to center back (like I sketched here). The skirt is probably a bit short for a 'period' look but should work just fine for the twenty-first century.

The silhouette is still quite new to me even though the dress is very comfortable. 
When getting ready to take these pictures, I became very aware of the fact that I don't have any 1930's style hats or shoes or glasses (I've never seen women wearing glasses in neither drawings nor photographs from the era anyway). And I don't have a matching hairstyle nor any idea as to how to manipulate my long locks and fringe to imitate those semi-cropped curls. Not that I mind about that usually, but I do like to present a pretty picture when showing of my new dress for the first time ;)

I've been looking at those 1930's magazines a lot lately and I quite like them. So, there may be more garments inspired by them in the near future.  

November 30, 2013

Listing

Well, that post about pattern making classes brought out a lot of people! I had no idea my blog had so many readers from this very country.
As a result, I thought it might be a good idea to sum up the available sources of education. I only have real information about institutions here in the Netherlands. In the comments to the previous post, Jo Ashcroft and Belle Megan told about their experiences with courses in New Zealand and the UK respectively. If you live anywhere near them, I recommend checking those out. I would also love for any one who has anything to add about pattern making courses to do so in the comments to this post.

To start the line-up, I googled the City & Guild course mentioned by Belle Megan and found this site. Not being a UK resident, I don't really know anything about this but there seems to be a wide range of courses available, in all kinds of fields. Even including pattern making.

All the following links are about Dutch institutions, most of which don't have an English version to their website.

First up are the esteemed members of the arcane sisterhood of Dutch sewing teachers (no offense, really):

- Ensaid
- Dankaerts
- Rotterdamse Snijschool

All three have been around for decades (I'm pretty sure all of them were already there in the 1950's…) and they all offer both professional courses which teach seamstresses of many different skill levels as well as hobby courses. At all of them, pattern making is a part of the professional courses.
Rotterdamse Snijschool teaches at its own venue in the city of Rotterdam. Both other institutions work with a system of teachers who are graduates of their own top-level course. Those are independent entrepreneurs teaching from the system's curriculum in their own studios. Exams are usually held annually in one location.
Because Ensaid and Dankaerts teachers work independently, you may be able to find one who will teach some pattern making even if you don't want to do the professional course.

Then, there are two different institutions, both of which are located in Amsterdam:

- Akademie Vogue
-  Meesteropleiding coupeur

The first one is an independent institute for fashion education which has been around in one way or another since 1937. Nowadays, it allows students to pick from a wide range of courses, some of which can be combined for specific diplomas. The focus is mostly on styling and design but there is a separate course in pattern making available. Sewing is not taught separately. 
The Meesteropleiding has only been around since 2011. It is designed to be a hard-core sewing and pattern making education, which produces highly skilled craftspeople for the sewing studios of theatre companies and couture houses. They also offer short courses, some of which seem to be geared towards the enthusiastic amateur and some of those include pattern making.

As far as I know, those are all the institutions (outside of the regular MBO and HBO educations, that vocational education and college of the non-Dutch) which teach pattern making in the Netherlands.
From this little line-up, you may already have noticed that if you live outside the Randstad and you are looking for a course, you are likely to find only Ensaid and/or Dankaerts courses near you. 
Of course, there are also sewing and pattern making teachers who are not connected to any institution. Of course, the problem with those is that there is no way to know how good they are and what they can teach you before you try out their lessons. 
The Rotterdamse Snijschool and the two institutions in Amsterdam have annual open days and I think any teacher should allow potential students to try out a lesson before they commit to a whole course (if you even have to do so. Some teachers allow students to pay per lesson). 

I hope this is helpful and if you have anything to add, please comment.

November 26, 2013

Sauvage

Can I interest you in a bit of rant? Or maybe a bit of a lecture?

It's about something I learned while teaching at iFabrica: the teaching of pattern making (here in the Netherlands at least).
My students-for-two-days were both interested in pattern making but where they lived, they could only learn it as a part of a three year course intended for the wannabe professional dress maker. Not an attractive prospect for a hobby seamstress who just wants to make well fitting clothes to her own design for herself.
And one of the ladies who worked at iFabrica had actually done that particular course but told me she didn't feel confident drafting patterns at all. And she had never been taught to make her own designs.
I was surprised at all that. When I wanted to learn pattern making, I found M, here in The Hague. An experienced designer and pattern maker who also taught drafting to small groups of interested amateurs.

My earliest training in drafting patterns was about making slopers to my measurements and then coming up with designs based on those. Of course, I was a very enthusiastic student and got in loads of practice over a relatively short time. The whole thing gave me what I would consider a well-informed can-do attitude towards both designing my own clothes and drafting the patterns for them.

Now, it seems like I've just been very lucky. Most people looking for pattern making lessons are confronted with extensive education programs involving thick books with separate slopers for all kinds of garments (which I don't think you need…). Education focussed on teaching rules rather than on developing insight and building skill. And not targeted at those who just want to expand their options when sewing for themselves.
Apparently, pattern making courses are like that all over the country. 
I kind of knew there were a couple of institutions teaching sewing and pattern making, I didn't know they were so dominant. 
They're like the arcane sisterhood of the Dutch sewing world…
As a heretic savant, I'm wondering if there's anything I could or should do... 

P.S. Of course, I know there's a wealth of information on pattern making to be found both online and in books. However, and I am speaking from personal experience here as well, a bit of real-life teaching makes it much easier to get started.

November 22, 2013

Slow and steady...

… wins the race. Or so they say…
Progress on the green crepe dress has been slow and steady. It seems like I have to agonize over every detail with this one. 

By now, the outside of the dress is fully assembled. Cutting the cowl/center from bodice from a different fabric allowed me to cut the dress from the green crepe I had without compromising skirt flare or sleeve length. It also allowed me to make a very full cowl shape with pleats and to cut a full lining for the front bodice on it. Which is practical because you very easily get to see the inside of a cowl. I had my doubts about using satin (even though this is a silk one) on account of its thin-ness and shine, but I'm glad I did. I could only do the lining-thing because it's so thin and the shine, confined as it is to just a small part of the dress, is actually fairly chic.
The green wool crepe is joy to work with. Soft and drapey and easy to mold into shape but not so much so that pieces lose their shape the moment they are cut. I love it.
Someone warned me in the comments to an earlier post about wool crepe being scratchy but her experience must have been with a different variety. This stuff pillow-y and soft with just a hint of that distinctive wool prickle.

Right now, I'm still not done obsessing over lining. Earlier in construction, I had already decided the fabric didn't feel scratchy to me and lining would make those long slim sleeves uncomfortably bulky and rigid. So, the sleeves and back bodice are unlined. I already explained the treatment of the front bodice. Now, I just have the skirt to worry about. I think I should line it because this fabric will cling to any tights or stockings worn under it if I don't. I thought I had enough of satin left over for a skirt lining (which will be a plain and straighter version of the skirt. just side seams, no insert) but the piece was just too short in one place. That's what you get for cutting anything, let alone a rather large double front piece, on the bias. 
I should dig through my stash. I'm pretty sure I've got some nice quality lining in the same colour as well. But the whole issue took the wind out of my sails again and now I'll be too busy with work until (at least) this Sunday…

Oh, and I thought about how this lining issue was dealt with in the past. You know, in the eras from which I take inspiration for a dress like this. My 1930's magazines only ever mention linings for coats or for visible details like draped necklines or scarves. In the 1950's lining the bodice wasn't unusual, lining the skirt was. Of course, all of this has to do with the changes in underwear. Ladies back then would have worn their dresses over a bra, girdle and full slip. With big fully petticoats thrown in for full skirted 50's dresses. 

I hope I'll finish my dress next week. Even if I can work on it a lot on Sunday, I'll probably leave it to hang for a few days before I hem it. Flared panels, wool crepe, bias hang...

November 18, 2013

Making Pattern Magic

These past two Sundays, I've been teaching Pattern Magic at iFabrica in Amsterdam.

As I announced before, it was a two day course. Participants had to have some sewing experience and it was my aim to let them get to grips with Pattern Magic. I've heard so often (both online and in real life) from people who own and admire the books, but are too intimidated or puzzled to make anything from them. That was the main thing I wanted to tackle in this course. 
Judging from the reactions I got, I think that worked.

Both of the ladies who signed up for this course, and both ladies from iFabrica who took part as well, were, nice enthusiastic people who wanted to be able to incorporate Pattern Magic designs into their sewing. 

On the first day, we made slopers (not the Bunka block. I don't think a waist-length sloper is very practical on its own) via a shortcut. My regular pattern making book contains slopers in standard sizes on tracing sheets. We used those and altered them to fit each individual. Much faster than drafting from scratch. 

Because the group was small, dividing attention was not a problem. So, everyone could pick their own project to work on. Drafting those started on the first day and continued yesterday. The was not enough time for finished products but everyone's patterns were finished and tested so I have no doubts those will become great garments.

I've thoroughly enjoyed the experience, and I hope that counts for everyone. 
I've got another course coming up next month. It's one day and it's about upcycling and making bags and you can still sign up.